TH-8955 Quick-drying epoxy AB adhesive within 5 minutes, glue for glass crystal lighting fixtures, epoxy sealant for bonding acrylic to ceramics and metals
一、Fast-drying epoxy resin glue
Epoxy resin glue characteristics
Yantai brand quick-drying epoxy resin glue is a two-component epoxy resin AB adhesive made of the latest international environmental protection technology and advanced technology. It has many advantages such as environmental protection, non-toxicity, high bonding strength, good toughness, oil resistance, water resistance, acid and alkali resistance, and good insulation. It has a wide range of applications. After the bonded object is cured, it is flawless. No heating is required and it can be cured at room temperature.
二、Transparent quick-drying epoxy resin glue uses
|
model |
Name |
purpose |
|
TH-8955 |
Fast-drying epoxy resin AB glue |
Fast-curing type, usually used in the manufacturing, bonding, potting and repair of high-end ceramics, glass, metals, crystals, jade, jewelry, granite, lighting fixtures, instruments, handicrafts, sporting goods, leisure and entertainment equipment, furniture, decoration, digital technology and other products. |
三、Technical parameters of quick-drying epoxy resin glue
|
model |
colloid color |
viscosity（CPS）（25℃） |
Mixing ratio of glue |
Operable time（25℃） |
curing time（25℃） |
shear strength（Mpa） |
temperature resistance（℃） |
shelf life（25℃） |
Packing specification |
||||
|
TH-8955
|
A：fully transparent |
30000-35000 |
1:1 |
3-5min |
Initial solidification for 5 to 10 minutes |
≥18 |
-60至+100 |
24 months |
2kg/组 |
||||
|
B：completely transparent |
30000-35000 |
Fully cured for 24 hours |
|||||||||||
|
Parameters after curing |
|||||||||||||
|
hardness Shore D |
bending strength kg/mm2 |
tensile strength kg/mm2 |
compressive strength kg/mm2 |
water absorption rate 25℃ %24小时 |
|||||||||
|
78~85 |
14~16 |
12~13 |
20~23 |
﹤0.1 |
|||||||||
|
impact strength kg/mm2/cm |
volume resistivity 25℃ Ohm-cm |
surface resistance 25℃ Ohm |
Withstand voltage 25℃ Kv/mm |
oil resistant |
|||||||||
|
8.5 |
0.38X1015 |
0.2×1015 |
15~18 |
engine oil, diesel oil |
|||||||||
四、Usage of quick-drying epoxy resin glue
★ The surface of the adherend must be clean, smooth and dry. For the best effect, when different materials are bonded to each other, please treat the surface (polishing, grinding, treatment agent) according to the actual situation.
★ Mix components A and B in a 1:1 ratio and stir evenly. Apply it to the surface of the adherend. The colloid initially sets in 10 minutes at normal temperature (25°C). The best effect can be achieved in 12 hours.
★ For bonded products, carry out process treatment according to bonding requirements to avoid affecting the effect.
★ If this product is slightly thick, it is a normal phenomenon and does not affect the bonding effect.
★ When used in batches by users, please conduct a test first. Avoid affecting the bonding effect due to improper operation.
五、Precautions for fast-drying epoxy resin glue
★ Keep the workplace ventilated and keep it out of the reach of children.
★ When operating, please wear isolation gloves. If it touches the skin or eyes, rinse immediately with clean water or seek medical attention.
★ Do not install the two adhesives in a mixed state when not in use. Do not cover the adhesive cap wrongly after use.
★ Store in a cool, dry, ventilated place and keep away from high temperatures.
